We have discovered the article about What Would Cause My Electric Water Heater to Stop Working? listed below on the net and felt it made good sense to write about it with you in this article.
Many modern residences take advantage of an electric water heater for their heating system, due to its benefit as well as simplicity of use. Nevertheless, much like any other electrical devices, problems might develop with its usage, unexpectedly. It can be really frustrating to wake up to a cold shower instead of a hot one or having your bath with water that isn't warm sufficient or even also hot. Whatever the instance may be, hot water heater issues can be fairly stressful. Thankfully, we have actually made a checklist of possible remedies to your hot water heater issues. There are a variety of aspects that could cause many of these troubles, it could be a concern with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you shut off the main power supply for safety. Whatever the issue is, getting it repaired need to not present too much of a problem if you follow these actions:
Call A Professional:
If after changing all malfunctioning parts as well as resetting your temperature level, the water heater still isn't functioning, you may require to contact a professional plumber for a professional point of view. The issue with your heating unit could be that the hot and cold faucets have actually been changed or it might be undersized for the amount of warm water needed in your house. Whatever the situation may be, a specialist plumber would assist address the issue.
Examine Your Power Supply:
As fundamental as this might seem, it is extremely required. Without ample power, your water heater will certainly not function. So the first thing to do when your water instantly stops working is to verify that it isn't a power problem. Inspect if the fuse is burnt out or the breaker stumbled. If the circuit breaker is the problem, merely turn it off and on once more. Change any damaged or damaged fuse. Test the home appliance with power after these adjustments to see if it's now working.
Examine Your Thermostat:
If your water heater still isn't working or the water appearing isn't warm sufficient, you may require to examine the temperature level settings on your upper thermostat. Make sure the breaker is turned off before doing anything. Open up the access panel and press the red button for temperature reset above the thermostat. This need to aid heat the water. Turn the breaker back on and examine if the trouble has actually been settled.
Examine the Heating Element in the Water Heater:
If it's not a power trouble, then try checking out your burner if it is still working. Examine each of your heating elements to be sure the trouble isn't with any of them. If any of them is defective, change that component and afterwards check whether the warm water is back on.
Final thought
Hot water heater problems are not constantly major. Many of them result from small issues like a blown fuse or damaged heating element. Replacing the damaged parts must do the trick. Nonetheless, if you are still not able to fix the issue, give a call to your nearby plumber to find to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Do you really like reading about How to Troubleshoot and Repair an Electric Water Heater? Leave a remark further down. We will be interested to listen to your thinking about this content. We hope to see you back again in the near future. Sharing is nice. Helping others is fun. I praise you for your time. Kindly visit our website back soon.
Book Inspection